SIMPLE WIRING SOLUTION C-BS

The simplest complete wiring system ever seen. Ideal for custom builds or rewiring older bikes. The wires from OEM handlebar switches or push buttons for ignition, high and low beam, indicators, starter motor, horn, brake light, speedometer and warning lights connect to the front C-BS box, for example installed in the headlight housing. The front box also connects to the ignition switch and then, with just three data cables, to the rear box, for example installed under the seat. The rear C-BS box connects to the starter relay, tail light, brake light, rear indicators and earth. Power, horn and front indicators can be connected to either the front or rear box. This saves an impressive length of cable, plenty of space and many hours of installation time. Both the front and rear control modules measure 50 x 12,5 x 42mm (approx. 2" x 1/2" x 1 5/8"), making it easy to find room for them. The system can be used with or without a side stand switch check and with or without a neutral switch check, 6 to 18-volt system.


Specifications


Pack
1


HS Code
8714109090


Origin
DE