Kit de camchest Race Series® con taqués de corto recorrido - ALMACEN USA-

This item is in stock in the USA; before placing your order, please read the USA WAREHOUSE PURCHASE CONDITIONS.




Includes: 487 Reaper® Chain Drive camshaft, cam installation kit, Race Series® Short Travel Lifters, one-piece pushrod, Race Series® oil pump, high-flow cam plate and ARP studs and nuts, plus cam plate/oil pump fixings.
487 Reaper Cam
Bolt-on installation
Chain drive
RPM Range 2.250 - 6.100
Camshaft for 114" and 117" engines
Responds very well to increases in diameter and/or compression
Maintains power at low revs and offers strong response above 2,950 rpm compared to the original.
Camshaft specifications measured in the engine on the tappet @ 0.050 using a rocker arm ratio of 1.61.
Camshaft installation kit
Includes cam bearing, cam/crankshaft fixings and gasket/O-ring kit.
Short stroke Race Series® levers
Machined steel hydraulic lifters with 0.115" travel
Single-piece pushrods
HP+ 0.165 wall thickness, +0.040, single piece
Race Series® oil pump
High-flow 2.250 chrome-molybdenum gerotor gears
27% higher pressure and recovery gear volume compared to original
42% greater intake volume with steps, ports and holes matched to the engine sump.
46% more oil volume to crankshaft and conrod bearing
Engine temperatures 15°-25° lower
Oil temperatures 15° to 30° lower
10-30 PSI additional oil pressure
Reduces wet sumping, blow-by, and oily air filters.
Magnets in the oil pump to protect gears and pressure relief valve
FEULING® test results show a 50% reduction in sump oil level.
High-flow cam plate
Increase of 2 horsepower and 2 ft. lb. of torque at the rear wheel
Manufactured in the USA
Feuling does not recommend adjustments exceeding original emissions standards.
The kit includes:
• 487 Reaper camshaft
• HP+ rods
• Race Series® Short Travel Tappets
• High-flow camshaft plate
• Race Series® oil pump
• Camshaft installation kit
• ARP balancer bolts and nuts
• Fixings for camshaft/ oil pump plate



Specifications


Brand
FEULING PARTS


Supplier reference
7272ST


Application
Oil-cooled


Features
Short-stroke pins


Intake cam centre
98,5°


Exhaust cam centre
103,25°


Intake closure
37°


Exhaust Clamp
17,5°


Intake duration
237°


Exhaust duration
241,5°


Intake valve lift
0,478"


Intake valve lift at TDC
0,180"


Exhaust valve lift
0,487"


Exhaust valve lift at TDC
0,146"


Model
Reaper


Product name
Camshaft housing kit


Type
Chain drive


Units
Kit


Open intake valve
20,5°


Open Exhaust Valve
44°


Version
487 Series