FEULING PARTS

Race Series® cam chest kit with short-stroke tappets

2.509,65€ IVA inc.

Made to order from the USA

Estimated delivery in 30-45 days Shipping surcharge 15€ per order No cancellation or return, unless defective Terms and conditions

Version: Kit de árbol de levas RS 487 ST transmisión por cadena refrigerado por aceite M8 17-
SKU: AK-2674-2534 Category: Brand:
Compatible motorcycles (37 models)
Not exactly what you're looking for?Need help finding your spare part? Tell us and we will take care of it.
Locate your spare part
Version Kit de árbol de levas RS 487 ST transmisión por cadena refrigerado por aceite M8 17-
Brand

FEULING PARTS

Motorcycle family

,

Made to order from the USA

You may also like

Descripción.

  • Includes: 487 Reaper® Chain Drive camshaft, cam installation kit, Race Series® Short Travel Lifters, one-piece pushrod, Race Series® oil pump, high-flow cam plate and ARP studs and nuts, plus cam plate/oil pump fixings.
  • 487 Reaper Cam
  • Bolt-on installation
  • Chain drive
  • RPM Range 2.250 - 6.100
  • Camshaft for 114" and 117" engines
  • Responds very well to increases in diameter and/or compression
  • Maintains power at low revs and offers strong response above 2,950 rpm compared to the original.
  • Camshaft specifications measured in the engine on the tappet @ 0.050 using a rocker arm ratio of 1.61.
  • Camshaft installation kit
  • Includes cam bearing, cam/crankshaft fixings and gasket/O-ring kit.
  • Short stroke Race Series® levers
  • Machined steel hydraulic lifters with 0.115" travel
  • Single-piece pushrods
  • HP+ 0.165 wall thickness, +0.040, single piece
  • Race Series® oil pump
  • High-flow 2.250 chrome-molybdenum gerotor gears
  • 27% higher pressure and recovery gear volume compared to original
  • 42% greater intake volume with steps, ports and holes matched to the engine sump.
  • 46% more oil volume to crankshaft and conrod bearing
  • Engine temperatures 15°-25° lower
  • Oil temperatures 15° to 30° lower
  • 10-30 PSI additional oil pressure
  • Reduces wet sumping, blow-by, and oily air filters.
  • Magnets in the oil pump to protect gears and pressure relief valve
  • FEULING® test results show a 50% reduction in sump oil level.
  • High-flow cam plate
  • Increase of 2 horsepower and 2 ft. lb. of torque at the rear wheel
  • Manufactured in the USA
  • Feuling does not recommend adjustments exceeding original emissions standards.
  • The kit includes:
  • • 487 Reaper camshaft
  • • HP+ rods
  • • Race Series® Short Travel Tappets
  • • High-flow camshaft plate
  • • Race Series® oil pump
  • • Camshaft installation kit
  • • ARP balancer bolts and nuts
  • • Fixings for camshaft/ oil pump plate

Specifications

Brand FEULING PARTS
Supplier reference 7272ST
Application Oil-cooled
Features Short-stroke pins
Intake cam centre 98,5°
Exhaust cam centre 103,25°
Intake closure 37°
Exhaust Clamp 17,5°
Intake duration 237°
Exhaust duration 241,5°
Intake valve lift 0,478"
Intake valve lift at TDC 0,180"
Exhaust valve lift 0,487"
Exhaust valve lift at TDC 0,146"
Model Reaper
Product name Camshaft housing kit
Type Chain drive
Units Kit
Open intake valve 20,5°
Open Exhaust Valve 44°
Version 487 Series

Contact

Av. Ingeniero José
Alegría nº 4, Bajo 2
30007 Murcia Tel.663663739

Métodos de pago

en