Kit de camchest Race Series® - ALMACEN USA-

This item is in stock in the USA; before placing your order, please read the USA WAREHOUSE PURCHASE CONDITIONS.




Includes 487 Reaper® Chain Drive camshaft, cam installation kit, Race Series tappets, one-piece pushrod, Race Series® oil pump, high-flow cam plate and ARP studs and nuts, plus cam plate/oil pump bolts.
487 Reaper Cam
Chain drive
38° overlap
RPM range: 2,250 - 6,100
Camshaft for 114" and 117" engine
Responds very well to increases in diameter and/or compression
Maintains power at low revs and offers greater thrust above 2,950 rpm compared to the original
Camshaft specifications measured on the engine on the lifter @ 0.050 using a rocker arm ratio of 1.61
Cam installation kit
Includes cam bearing, cam/crank bolts and gasket/O-ring set
Race Series® Camshafts
Full-stroke hydraulic pushrods manufactured from machined steel with 0.200" stroke
Single-piece pushrod
Heavy-duty 7/16" diameter HP+ tube with 0.165 wall thickness, precise concentricity, heat-treated and black oxide finish
Race Series® oil pump
High-flow 2.250 chrome-molybdenum gerotor gears
27% more pressure and intake gear volume compared to original
42% greater evacuation volume thanks to passages, ports and holes adjusted to the engine sump
46% more crankshaft and connecting rod bearing oil volume
Engine temperatures 15°-25° lower
Oil temperatures 15°-30° lower
10-30 PSI additional oil pressure
Reduces wet sumping, blow-by, and oily air filters
Magnets to protect gears and pressure relief valve
FEULING test results show a 50% reduction in engine sump oil level.
High-flow cam plate
Increases in rear wheel power of 2 horsepower and 2 ft. lb. of torque possible
Manufactured in the USA
Feuling does not recommend adjusting beyond original emissions standards
The kit includes:
• 487 Reaper camshaft
• HP+ rods
• Race Series® Spigots
• High-flow camshaft plate
• Race Series® oil pump
• Camshaft installation kit
• ARP balancer bolts and nuts
• Fixings for camshaft/ oil pump plate



Specifications


Brand
FEULING PARTS


Supplier reference
7272


Application
Oil-cooled


Intake cam centre
98,5°


Exhaust cam centre
103,25°


Intake closure
37°


Exhaust Clamp
17,5°


Intake duration
237°


Exhaust duration
241,5°


Intake valve lift
0,478"


Intake valve lift at TDC
0,180"


Exhaust valve lift
0,487"


Exhaust valve lift at TDC
0,146"


Model
Reaper


Product name
Camshaft housing kit


Type
Chain drive


Units
Kit


Open intake valve
20,5°


Open Exhaust Valve
44°


Version
487 Series