Kit de camchest Race Series® con taqués de corto recorrido - ALMACEN USA-

This item is in stock in the USA; before placing your order, please read the USA WAREHOUSE PURCHASE CONDITIONS.




Includes 487 Reaper® Chain Drive camshaft, cam installation kit, Race Series® Short Travel tappets, one-piece pushrod, Race Series® oil pump, high-flow cam plate and ARP bolts/nuts, cam plate/oil pump fixings.
487 Reaper camshaft.
Direct installation
Chain drive
Camshaft for 114" and 117" engine
Responds very well to increased bore and/or compression
Maintains power at low revs and offers strong response above 2,950 rpm compared to the original
RPM Range 2.250 - 6.100
38° Overlap
Camshaft specifications measured on the engine on the tappet @ 0.050 using a rocker arm ratio of 1.61.
Camshaft installation kit
Includes cam bearing, cam/crank hardware and gasket/O-ring kit.
Race Series® Short Travel Lifters
Short-stroke roller hydraulic tappets, standard outer diameter (0,8420-0,8423)
Designed with 0.115 total lift
Single-piece pushrod
HP+ 0.165 wall thickness, +0.040 longer
7/16" diameter tube, 0.165 wall thickness, high strength, precise concentricity, heat-treated and finished in black oxide.
Race Series® oil pump
Increases oil pressure, reservoir volume and engine oil flow
30% greater pressure gear volume compared to the original
53% greater recovery gear volume compared to the original
42% greater evacuation volume with ducts and holes matched to the engine sump
46% more oil volume for the crankshaft and connecting rod bearing
Engine temperatures 15°-25° lower
Oil temperatures 15°-30° lower
10-30 PSI additional oil pressure
Reduces wet sumping, blow-by, and oily air filters
Magnets in the oil pump to protect gears and pressure relief valve
Rear wheel power increase of 2 bhp and 2 ft. lb. torque.
FEULING test results show a 50% reduction in sump oil level.
High-flow cam plate
Bolts into original location
7075 machined aluminium
Manufactured in the USA
Feuling does not recommend adjustments exceeding original emissions standards.
Not suitable for water-cooled VVT engines.
The kit includes:
• 487 Reaper Chain Camshaft
• Camshaft installation kit
• Race Series® Short Travel Tappets
• HP+® one-piece pushrods
• Race Series® oil pump
• High-flow camshaft plate
• ARP balancer bolts and nuts
• Fixings for camshaft/ oil pump plate



Specifications


Brand
FEULING PARTS


Supplier reference
7273ST


Application
Water-cooled


Features
Short-stroke pins


Intake cam centre
98,5°


Exhaust cam centre
103,25°


Intake closure
37°


Exhaust Clamp
17,5°


Intake duration
237°


Exhaust duration
241,5°


Intake valve lift
0,478"


Intake valve lift at TDC
0,180"


Exhaust valve lift
0,487"


Exhaust valve lift at TDC
0,146"


Model
Reaper


Product name
Camshaft housing kit


Type
Chain drive


Units
Kit


Open intake valve
20,5°


Open Exhaust Valve
44°


Version
487 Series