FEULING PARTS

Race Series® cam chest kit with short-stroke tappets

2.509,65€ IVA inc.

Made to order from the USA

Estimated delivery in 30-45 days Shipping surcharge 15€ per order No cancellation or return, unless defective Terms and conditions

Version: Kit de levas RS 487 ST transmisión por cadena refrigerado por agua central M8 17-
SKU: AK-0342-3589 Category: Brand:
Compatible motorcycles (35 models)
Not exactly what you're looking for?Need help finding your spare part? Tell us and we will take care of it.
Locate your spare part
Version Kit de levas RS 487 ST transmisión por cadena refrigerado por agua central M8 17-
Brand

FEULING PARTS

Motorcycle family

, , ,

Made to order from the USA

You may also like

Descripción.

  • Includes 487 Reaper® Chain Drive camshaft, cam installation kit, Race Series® Short Travel tappets, one-piece pushrod, Race Series® oil pump, high-flow cam plate and ARP bolts/nuts, cam plate/oil pump fixings.
  • 487 Reaper camshaft.
  • Direct installation
  • Chain drive
  • Camshaft for 114" and 117" engine
  • Responds very well to increased bore and/or compression
  • Maintains power at low revs and offers strong response above 2,950 rpm compared to the original
  • RPM Range 2.250 - 6.100
  • 38° Overlap
  • Camshaft specifications measured on the engine on the tappet @ 0.050 using a rocker arm ratio of 1.61.
  • Camshaft installation kit
  • Includes cam bearing, cam/crank hardware and gasket/O-ring kit.
  • Race Series® Short Travel Lifters
  • Short-stroke roller hydraulic tappets, standard outer diameter (0,8420-0,8423)
  • Designed with 0.115 total lift
  • Single-piece pushrod
  • HP+ 0.165 wall thickness, +0.040 longer
  • 7/16" diameter tube, 0.165 wall thickness, high strength, precise concentricity, heat-treated and finished in black oxide.
  • Race Series® oil pump
  • Increases oil pressure, reservoir volume and engine oil flow
  • 30% greater pressure gear volume compared to the original
  • 53% greater recovery gear volume compared to the original
  • 42% greater evacuation volume with ducts and holes matched to the engine sump
  • 46% more oil volume for the crankshaft and connecting rod bearing
  • Engine temperatures 15°-25° lower
  • Oil temperatures 15°-30° lower
  • 10-30 PSI additional oil pressure
  • Reduces wet sumping, blow-by, and oily air filters
  • Magnets in the oil pump to protect gears and pressure relief valve
  • Rear wheel power increase of 2 bhp and 2 ft. lb. torque.
  • FEULING test results show a 50% reduction in sump oil level.
  • High-flow cam plate
  • Bolts into original location
  • 7075 machined aluminium
  • Manufactured in the USA
  • Feuling does not recommend adjustments exceeding original emissions standards.
  • Not suitable for water-cooled VVT engines.
  • The kit includes:
  • • 487 Reaper Chain Camshaft
  • • Camshaft installation kit
  • • Race Series® Short Travel Tappets
  • • HP+® one-piece pushrods
  • • Race Series® oil pump
  • • High-flow camshaft plate
  • • ARP balancer bolts and nuts
  • • Fixings for camshaft/ oil pump plate

Specifications

Brand FEULING PARTS
Supplier reference 7273ST
Application Water-cooled
Features Short-stroke pins
Intake cam centre 98,5°
Exhaust cam centre 103,25°
Intake closure 37°
Exhaust Clamp 17,5°
Intake duration 237°
Exhaust duration 241,5°
Intake valve lift 0,478"
Intake valve lift at TDC 0,180"
Exhaust valve lift 0,487"
Exhaust valve lift at TDC 0,146"
Model Reaper
Product name Camshaft housing kit
Type Chain drive
Units Kit
Open intake valve 20,5°
Open Exhaust Valve 44°
Version 487 Series

Contact

Av. Ingeniero José
Alegría nº 4, Bajo 2
30007 Murcia Tel.663663739

Métodos de pago

en