Contact
Av. Ingeniero José
Alegría nº 4, Bajo 2
30007 Murcia Tel.663663739
Métodos de pago
- Visa
- Mastercard
- Bizum
- American Express
Kit de culata Super Stock® - cilindros 3-5/8" una bujía aluminio2.679,44€ IVA inc.
Juntas de culata - 3 7/8" / 3,927"111,98€ IVA inc.
Pastilla reglaje de válvula6,98€ IVA inc.
Set de espárragos de cilindro de recambio - Kit pernos OE16834-99108,26€ IVA inc.
Juego de Juntas de Instalación de Culata - Kit Super stock 3.625"80,32€ IVA inc.
Kit de pernos de culata - tornillos ARP 12 puntos366,23€ IVA inc.
- Reduces engine noise by adjusting the rocker arm axial play on the cylinder head
- Feuling recommends an ideal side clearance of 0,0035”–0,005” for optimal oil psi and reduced rocker noise
- M8 cylinder heads also exhibit excessive wear on the rocker arm support surfaces; placing the hardened washer on the thrust side helps reduce wear and further damage
- Manufactured in the USA
- These washers must be installed by a professional who can correctly measure axial play and tighten the rocker shaft nuts/bolts without damaging the washers.
- Includes washer thicknesses:
- • 6x 0,003"
- • 6x 0,005"
- • 6x 0,010"
Specifications
Brand FEULING PARTSSupplier reference 1230Model GorillaProduct name Calibrated padType Rocker shaftUnits 3 packs of 6
Av. Ingeniero José
Alegría nº 4, Bajo 2
30007 Murcia Tel.663663739