Polarity Changer

Some motorcycles switch the indicator outputs to negative when activated. This makes changing the original indicators for aftermarket indicators a bit difficult. This polarity converter is the solution. It converts the switched-to-earth signal from the BCM module or indicator relay into a positive supply voltage for the indicators. The module contains 2 independent channels. The maximum load is 60 watts per channel. With the green "Mode" wire you can decide whether the outputs switch on or off for 0.5 seconds when the module is powered up. This prevents the outputs receiving incorrect signals at switch-on if a connected control unit needs time to start up.


Specifications


Pack
1


HS Code
8714109090


Origin
DE