Cansmart Gen II - II Honda Africa Twin 1100 CRF1100L

High/Low Sync: Allows auxiliary lights to alternate between high/low beam settings using the original high beam switch.
Independent control of two sets of lights ON/OFF and intensity adjustment (day and night) from the vehicle's original switches.
Light modulation: Configure auxiliary lights to increase visibility to other drivers.
Flash to Pass: Need to get attention? Press the high beam switch three times and your auxiliary lights will flash rapidly three times.
Turn signal cancellation: This function turns off the corresponding auxiliary light when the turn signal is activated, preventing the auxiliary light from overpowering the signal.
Reverse flashing with hazard lights: Auxiliary lights flash in reverse to the hazard lights, increasing visibility in case of breakdown.
Plug & Play horn installation: Easily connect high-power horns such as our SoundBomb™ without additional wiring harness or relay.
Strobe with horn: When this function is activated, the CANsmart™ software makes the auxiliary lights flash when the horn sounds. Compatible with original horn or SoundBomb™.
"Smart Brake" technology activated by deceleration: CANsmart™ reads vehicle speed in real time and activates the auxiliary brake light during deceleration before you touch the brake. You can adjust the sensitivity and minimum activation speed.
Flash Pattern Braking: CANsmart™ offers four different flash patterns that make our auxiliary brake lights even more visible to drivers behind you. You can configure the auxiliary lights to flash only during hard braking, flash continuously while braking, or flash four times rapidly and then remain steady (legal frequency in California).
Circuit Function Selector: The circuit function selector in the CANsmart™ software allows you to control any accessory on any of the four circuits. Click the circuit icon to expand the menu and select the desired function.
Switched power supply: CANsmart™ provides a universal "accessory" option with clean 12V switched power. The accessory connected to this circuit is activated and deactivated with the ignition.
Delay time: You can configure accessories on this circuit to remain on for up to 30 seconds after switching off the motorcycle.
On Board Power: The "accessory" circuit option is ideal for powering GPS, phone, heated clothing or other electronic devices.
Product Information
Brand: DENALI
Supplier Reference: DNL.WHS.21800
Features: Plug-and-Play
Colour/Finish: Black
Product Name: Handlebar Switch Control Unit
For Brand: Honda
Type: Brake Light, Gear, Indicator
Units: Unit