CANsmart™ GEN II V-Twin controller

The CANsmart Controller offers advanced lighting functions to improve road visibility.
The Modulate Lights function allows modulation of auxiliary or dipped headlights, increasing visibility to other drivers.
The Flash to Pass function allows you to attract attention by pressing the high beam switch three times, causing the auxiliary lights to flash three times rapidly.
High/Low Sync: allows alternating auxiliary and dipped beam headlights between programmable high/low settings using the original high beam switch
ON/OFF and dimming: independently controls two sets of lights and adjusts brightness (day and night) from the motorcycle's original cruise control switch. Click three times to switch on/off, or hold for 3 seconds for dimming mode (cycles between 10% and 100% brightness).
Modulate the dipped or auxiliary lights to increase your visibility to other drivers.
Flash to Pass - Want to attract attention? Press the high-beam switch three times and the auxiliary headlights will flash rapidly three times.
Flasher cancellation: this function switches off the corresponding auxiliary light when the indicator is activated, preventing the auxiliary light from overpowering the signal.
Flash with indicator: this function causes the corresponding auxiliary light to flash when the indicator is activated, allowing auxiliary lights to function as indicators.
Plug & Play horn installation: easily connect high-power horns such as our SoundBomb™ without the need for an additional harness or relay.
Strobe with horn: when this function is activated, the CANsmart™ software automatically flashes the auxiliary or dipped beam lights when the horn is pressed. Works with both the original horn and the SoundBomb™.
Intelligent braking technology activated by deceleration: CANsmart™ reads vehicle speed in real time and activates the auxiliary brake light when slowing down, even before the brake is applied. Adjustable sensitivity and minimum speed.
Switched power supply: the CANsmart™ provides a universal "accessory" option with clean switched 12V. The accessory connected to this circuit will switch on and off with the ignition.
Delay time: allows accessories connected to this circuit to remain powered for up to 30 seconds after switching the bike off.
On Board Power – The "accessories" circuit option is ideal for powering GPS, phone, heated clothing or other electronic devices.



Specifications


Brand
DENALI


Supplier reference
DNL.WHS.12300


Features
Plug-and-Play


Base colour
Black


Colour/finish
Black


Product name
Handlebar switch control unit


For brand
Harley Davidson®


Type
Brake light, Gear, Indicator


Units
Unit