Fast Eddy Co

Fast Eddy, roller tappet rebuild tool

830,28€ IVA inc.

Sin Disponibilidad

SKU: AK-4701-9216 Category: Brand:
More general like this
Not exactly what you're looking for?Need help finding your spare part? Tell us and we will take care of it.
Locate your spare part
Brand

Fast Eddy Co

Motorcycle family

Sin Disponibilidad

You may also like

Descripción.

Used to remove and install the rollers of hydraulic and solid valve lifters. Pierces the ends of the old axle, removes the old axle, installs the new rollers and adjusts the ends of the new axle. Currently the best tool available for a professional result.
- Fast, easy and precise replacement of tappet rollers.
- Compatible with tappets with body diameter of .730" to .740", roller diameter of .850" to .855" and roller width of .355" to .370".
- Not compatible with Evo or Twin Cam tappets.
- Precision machined with very tight tolerances for a perfect fit.
- The tappet does not move whilst carrying out the operations.
- Type III hard anodised finish to military specifications for incredible durability.
- Easily clamped in the bench vice to make all work easier.
- Made in the USA
User instructions.
Step 1: Drill through the ends of the old axle.
Use the included 7/32" drill bit and drill approximately 1/16" into each side of the old tappet axle. Lightly grease the drill bit before inserting it through the hardened drilling bushing. Be sure to blow out the swarf between drilling both sides of the tappet.
Step 2: Remove the old shaft.
Carefully drive out the old tappet axle using the included punch. This should require a few firm strikes with a 16 oz ball peen hammer. If 2-3 firm strikes are not enough to start moving the old axle, remove the tappet and return it to the station/step 1 to drill the end of the axle a little deeper before proceeding again with step 2 and extracting the axle.
Step 3: Install the new roller set and adjust the ends of the new axle.
Install the new roller/replacement assembly and axle into the lifter body. The new axle should slide easily through the lifter body without forcing. Place the lifter assembly in station/step 3 of the tool and use the included roller pin punch to lightly stake the ends of the new axle on each side. This should require only 2-3 light/medium strikes with a 16 oz ball peen hammer.
It is best to turn the tappet several times between the first light hammer blows. The pin must remain centred within the tappet body, with an equal amount of pin protruding from each side.

Specifications

Brand Fast Eddy Co
Application 36-84 Big Twin (Excl. Evo); 57-85 XL Sportster. (Excl. Evo, Flatheads, Twin Cam) (NU)
Sales unit Set
Packaging weight 0 kg
HS Code 87141090
Original name Fast Eddy, tappet roller rebuild tool

Contact

Av. Ingeniero José
Alegría nº 4, Bajo 2
30007 Murcia Tel.663663739

Métodos de pago

en