Race Series® chain drive cam kit - Reace 592C M8 17

Kit includes Reaper® camshaft, full-lift 0.200" Racer Series hydraulic lifters, gasket/O-ring set allowing installation of Feuling HP+ 0.0165" wall single pushrods or original pushrods, ARP® cam/crank bolts and cam installation kit.
Manufactured in the USA
Due to the unstable nature of the 4-valve engine design with a rocker arm actuating two valve springs, Feuling recommends using single-piece pushrods rather than quick-install adjustable pushrods to maintain maximum cam/valve lift and reduce valvetrain vibrations and associated hydraulic lifter issues.
Feuling fixing kit recommended to prevent cylinder head cracks; replaces swingarm pivot bolts with studs and nuts to reduce stress on the pivot supports.
Race Series tappets have a slower release rate to support cams with steep ramps and reinforced valve springs, allowing higher RPM before valve float.
Not suitable for '23-'24 models with 121" VVT engines.
Requires high-lift/high-load valve springs.
Clearances must be checked when installing this camshaft.
RPM range: 2750-6350+.
Overlap: 36.



Specifications


Brand
FEULING PARTS


Supplier reference
1458


Application
Intake, Exhaust


Intake cam centre
97°


Exhaust cam centre
116°


Intake closure
34°


Exhaust Clamp
16°


Intake duration
234°


Exhaust duration
264°


Intake valve lift
0,578"


Intake valve lift at TDC
0,182"


Exhaust valve lift
0,592"


Exhaust valve lift at TDC
0,146"


Model
Race Series®


Product name
Camshaft Kit


Type
Chain drive


Units
Kit


Open intake valve
20°


Open Exhaust Valve
68°


Version
592 Series