551 Easy Start cam kit

Facilitates starting by initially reducing compression; once the engine starts and rpm rise, the decompression cam retracts by centrifugal force and the engine runs normally, with full compression and no loss of performance.
Optimised for 88"/96"/103" Touring motorcycles up to 106" with slip-on exhausts and compression ratios from 9.0:1 to 9.0:9 with original start
Direct fit for original or slightly modified Touring models
Significantly improves low and mid-range torque
Maximum power from idle to 4000 rpm
Includes camshafts, gear cover gasket, bearings, retaining ring, O-ring, threadlocker and instructions.
Manufactured in the USA
Not recommended for compression ratios of 10.0:1 or higher.
The installer must check the spring lock, valve clearance, and valve-to-piston clearance.
Not suitable for models with OEM decompressors.
Compatible with original pushrods, tappets and springs (unless stated otherwise).



Specifications


Brand
S&S CYCLE


Supplier reference
106-5293


Application
Exhaust, Intake


Intake cam centre
91°


Exhaust cam centre
102°


Intake closure
19°


Exhaust Clamp
17°


Intake duration
215°


Exhaust duration
237°


Intake valve lift
0,550"


Intake valve lift at TDC
0,178"


Exhaust valve lift
0,550"


Exhaust valve lift at TDC
0,170"


Model
Easy Start


Product name
Camshaft housing kit


Type
Chain


Units
Kit


Open intake valve
17°


Open Exhaust Valve
41°


Version
Series 551