Contact
Av. Ingeniero José
Alegría nº 4, Bajo 2
30007 Murcia Tel.663663739
Métodos de pago
- Visa
- Mastercard
- Bizum
- American Express
These O2 sensor elimination kits are used when you want your motorcycle to run without O2 sensors, for example when you want to change the air/fuel ratio at idle and part throttle for racing applications using DiaG4bike, Daytona Twin Tec Twin Tuners in conjunction with a Daytona Twin Scan Tool, Dynojet Power Commander, Screamin' Eagle Pro Super Tuner or similar. The eliminators plug into the stock wiring harness and simulate a cold sensor condition, causing the ECM to remain in "open loop" operation. The eliminators for 4-wire heated sensors can also be used to eliminate the secondary O2 sensors on Euro-5 motorcycles, but their only function then is to keep moisture and dirt out of the wiring-side connectors to keep them intact for later use. The CEL (Check Engine Light) and related DTCs (Diagnostic Trouble Codes) can be deactivated with the Diag4Bike software and a Diag4Bike tuning licence.
Specifications
Pack 1HS Code 8714109090Origin NLMotorcycle family Dyna | Softail | Touring | Trike
Av. Ingeniero José
Alegría nº 4, Bajo 2
30007 Murcia Tel.663663739