Elektronikbox air suspension control module

This Air Ride module memorises and recalls the compressor run time and valve opening time, thus saving and remembering the specific height settings of your motorcycle. The two outputs can drive loads with up to 350 watts peak and 200 watts continuously. Individual height can be set and stored using the following procedure:
 
- Press the button and start the engine. The pump will begin operating immediately.
- Keep the button pressed until your motorcycle reaches the desired height.
- Release the button and press it again until the bike is in the lowest position. That's it.
 
The next time you start the engine, the Air Ride Control will activate the compressor until your bike returns to the set height. And when you switch off the engine, the Air Ride Control will lower the bike again. However, you can always stop the function by pressing the button. You can also control the height by pressing the button. One press activates the pump and another press activates the valve. Hold the button down until the bike is at the height you want. The module can also be used as a normal high-current button relay when the blue wire is connected to earth. It measures only 40 x 25 x 12.5 (1 9/16"x1"x1/2").


Specifications


Pack
1


HS Code
8714109090


Origin
DE