Keith Black cast hypereutectic pistons

363,51€ IVA inc.

Bajo pedido: envío estimado hacia el 22/10/2026

Version: Juego de pistones KB 9.5:1 +.030 Shovel 1340
SKU: AK-6723-8984 Category: Brand:
Compatible motorcycles (14 models)
Not exactly what you're looking for?Need help finding your spare part? Tell us and we will take care of it.
Locate your spare part
Version Juego de pistones KB 9.5:1 +.030 Shovel 1340
Brand

KB Keith Black Performance Motorcycle Pistons

Motorcycle family

, , , ,

Bajo pedido: envío estimado hacia el 22/10/2026

You may also like

Descripción.

Keith Black is one of the most respected US designers and builders of Drag-Race engines. He was the first to build V-8 racing engines exceeding 4000 horsepower. Keith has poured all his knowledge and experience into manufacturing aftermarket pistons for Harley-Davidson. The use of a special hypereutectic aluminium alloy, developed and race-tested by Keith himself, results in pistons that are lighter and offer more functionality than expensive forged pistons. Key features include reduced wear, lower fuel and oil consumption, tighter operating tolerances resulting in a quieter-running engine, and increased power output. The low heat transfer properties of the hypereutectic aluminium alloy keep the skirts cool and minimise piston expansion. Test engines have been run with a minimum clearance of 0.0005" (1/2 thou) between the piston and the cylinder wall. The high ring placement reduces detonation and increases the temperature of the top ring. Keith Black pistons will deliver peak power 2 to 4 degrees earlier in the cycle compared to conventional pistons. Available in standard sizes and oversizes for Knucklehead, Panhead, Shovelhead and Evolution Big Twin models from 1941 to the present, as well as Sportster 1200. Also available in various big bore and high compression versions, including a Big Bore kit that converts your Sportster 883 into a high-torque 1200 model. The pistons are competitively priced.

Note 1:
Complete piston kits contain 2 pistons with Hastings molybdenum chrome rings, piston pins and circlips.

Note 2:
A limited number of KB pistons have ring grooves that pass through the wrist pin bore. In order to have the piston rings properly supported, these pistons come with piston ring support rings. As support rings have no sealing function, they do not need to be replaced when installing new piston rings, but sometimes new ones are needed because a ring is lost or broken.

Specifications

Pack 1
HS Code 8714109090
Origin US
Motorcycle family Big Twin | FX | FXR | Softail | Touring

Contact

Av. Ingeniero José
Alegría nº 4, Bajo 2
30007 Murcia Tel.663663739

Métodos de pago

en