Contact
Av. Ingeniero José
Alegría nº 4, Bajo 2
30007 Murcia Tel.663663739
Métodos de pago
- Visa
- Mastercard
- Bizum
- American Express
Instalador JIMS para retén bomba de aceite179,98€ IVA inc.
Motion Pro, llava de correa para filtro de aceite21,42€ IVA inc.
Evolution Industries, llave para filtro de aceite71,42€ IVA inc.
Plantilla para taladrar canales de aceite79,05€ IVA inc.
Llave para filtro de aceite - 3"11,97€ IVA inc.
JIMS, llave para filtro de aceite Slim JIMS63,28€ IVA inc.Located inside the engine cases, it is difficult to check whether these pistons are working correctly. No longer, as this Jims piston jet test stand allows engine builders to test their operation before installing them. The unit works with compressed air and air-over-oil. When operated on air alone, the verification of proper flow through the piston jet can be observed. In air-over-oil mode, you can not only verify correct operation, but also physically see the oil spray pattern emanating from the jet. By adjusting the air regulator on the unit, mechanics can determine at what pressure the piston jet turns on and off. An additional benefit of the piston jet test stand is the ability to remove assembly lubricant from the narrow jet oil passage.
Specifications
Pack 1HS Code 8714109090Origin USMotorcycle family Dyna | Softail | Touring | Trike
Av. Ingeniero José
Alegría nº 4, Bajo 2
30007 Murcia Tel.663663739