Springer fork, OEM reproduction style +12"

- Fork: Black - Front legs: Black - Swing arms: Black - Springs: Chrome-plated - For 3/4" (19.05 mm) axle - Rake: 3° positive offset - 1" diameter fork stem - Length: +12" (Standard length is approx. 19" (48 cm) from the fork stem lower bearing to the centre of the wheel axle) - Made in the EU from forged steel - With standard oval rear legs - Never ride a motorcycle fitted with any type of Springer fork without a proper damping system!
Note: The 8, 12, 16 and 20" Springer Overstock forks come with a positive 3° offset and require the use of a special centre piece (981460 chrome or 981461 black) to mount the recent style handlebar risers.
Note: Forks with positive offset (wheel further forward) offer less trail than an inline fork. When using a custom frame with a raked neck, trail increases. Greater trail is acceptable as long as it is in a straight line. The bike may become heavy to steer at low speed, tend to fall into the corner and exhibit excess 'wheel flop' when parked. To overcome these problems, trail must be reduced, which is achieved with a positive trail fork. For this reason, only Overstock length Springer forks with positive trail are offered.


Specifications


Brand
Samwel


Application
36-E46 UL, EL style; Custom bikes with custom high neck or raked neck frames that require +12" Springer forks


Colour
Black


Material
Steel


Position
['Front']


Packaging weight
18.45 kg


HS Code
87141090


Motorcycle family
BIG TWIN


Original name
Springer fork, OEM style reproduction +12"