Stage 2 camshaft - single stage

CNC machined from 8620 forged and cemented steel.
Designed and tested on a dynamometer in the USA
Designed using valve train software
Increases power by between 5% and 10%
Some camshafts feature Hot Cams Improved Throttle Design (I.T.R.) technology; they improve throttle response across the entire rpm range and offer significant power gains at mid and high revs.
Designed to improve performance at mid and high RPMs.
Designed as drop-in camshafts using the original valve springs (unless otherwise stated).
Slight power increase in the mid-range and upper rev range.
Does not use an automatic decompression mechanism.
The original starter motor is sufficient.
For single overhead cam engine.
Uses original springs and rocker arms.
Intake valve clearance: 0.130 mm.
Exhaust valve clearance: 0.150 mm.



Specifications


Brand
HOT CAMS


Supplier reference
1043-2


Application
Exhaust, Intake


Intake cam centre
106°


Exhaust cam centre
104,250°


Intake duration
254°


Exhaust duration
248,500°


Intake valve lift
9,00 mm


Exhaust valve lift
8,90 mm


Product name
Camshaft


Type
Stage 2


Units
Unit