Custom Springer Forks - 2" CROMO

Economical alternative to a Springer with shock absorber
Fully assembled with a straight top yoke bracket with integrated launch angle
Standard Springer length (31” measured from the top yoke to the axle) is comparable to a standard-length FXST front end
1" outer diameter steering stem designed for Timken® type bearings
Both rear bars are threaded for left or right brakes
The 3/4" external diameter shaft kit includes a brake support pivot with pressure washer and hub spacers (custom spacers may be required depending on the wheel used).
Measures 9-1/4” between swingarm pivots
The riser mounts are at 4-3/4" centres and threaded 1/2"-20
Requires wheel compatible with 3/4" outer diameter axle
These Springers are measured from the bottom of the top yoke to the centre of the axle.
Springers do not accept auxiliary light bars; no mudguard brackets
These Springer forks are not compatible with European models. The standard Springer length (31" measured from the upper bearing to the axle) is comparable to that of the standard FXST front end.



Specifications


Brand
DRAG SPECIALTIES


Supplier reference
MU35211


Colour/finish
Chrome


Size
50.80 mm (2.00") Reduction


Units
Unit