Custom Springer forks - 2" BLACK

Economical alternative to a Springer with shock absorber
Fully assembled with a straight top yoke bracket with integrated launch angle
Standard Springer length (31” measured from the top yoke to the axle) is comparable to a standard-length FXST front end
1" outer diameter steering stem designed for Timken® type bearings
Both rear bars are threaded for left or right brakes
The 3/4" external diameter shaft kit includes a brake support pivot with pressure washer and hub spacers (custom spacers may be required depending on the wheel used).
Measures 9-1/4” between swingarm pivots
The riser mounts are at 4-3/4" centres and threaded 1/2"-20
Requires wheel compatible with 3/4" outer diameter axle
These Springers are measured from the bottom of the top yoke to the centre of the axle.
Springers do not accept auxiliary light bars; no mudguard brackets
The standard Springer length (31" measured from the top yoke to the axle) is comparable to a standard-length FXST front end.



Specifications


Brand
DRAG SPECIALTIES


Supplier reference
MU35216


Colour/finish
Black


Size
50.80 mm (2.00") Reduction


Units
Unit