S&S CYCLE

583G gear-driven camshaft kit

1.265,91€ IVA inc.

Made to order from the USA

Estimated delivery in 30-45 days Shipping surcharge 15€ per order No cancellation or return, unless defective Terms and conditions

Version: Juego de árboles de levas 583G con transmisión por engranajes
SKU: AK-9514-8003 Category: Brand:
Compatible motorcycles (32 models)
Not exactly what you're looking for?Need help finding your spare part? Tell us and we will take care of it.
Locate your spare part
Version Juego de árboles de levas 583G con transmisión por engranajes
Brand

S&S CYCLE

Motorcycle family

, ,

Made to order from the USA

You may also like

Descripción.

  • Reverses the rotation direction of the rear camshaft, providing greater operational clearance between cams and allowing greater lift.
  • Improves valve timing accuracy by eliminating play and the loose fit of the original chain.
  • Delivers robust engine torque and power at low revs
  • Maximum performance between 1,500 and 5,000 rpm.
  • Material must be removed from the inner surface of the original gear cover to install
  • Hydraulic press and other professional tools are required for installation.
  • Camshaft bearings and seals must be replaced
  • S&S recommends using the adjustable pushrod/trim kit (sold separately)
  • The kit includes camshafts, internal and external gears, internal and external bearings, gasket and instruction manual
  • Made in the USA
  • Due to the inherent characteristics of gear systems, increased valve train noise may be perceived.
  • The installer must check the spring stop, valve clearance and valve-to-piston distance.
  • Not recommended for engines with compression ratios exceeding 10.1:1.
  • Not suitable for '06 Dyna
  • Twin Cam '00-'06 camshafts are for use with original splined transmission gears; for installation on Twin Cam '99 an external splined pinion is required, S&S recommends the Andrews 4340 steel transmission pinion.

Specifications

Brand S&S CYCLE
Supplier reference 330-0107
Application Exhaust, Intake
Intake cam centre 96,5°
Exhaust cam centre 107°
Intake closure 18°
Exhaust Clamp 24°
Intake duration 203°
Exhaust duration 262°
Intake valve lift 0,583"
Intake valve lift at TDC 0,113"
Exhaust valve lift 0,583"
Exhaust valve lift at TDC 0,206"
Product name Camshaft Kit
Type Equipment
Units Kit
Open intake valve 5°
Open Exhaust Valve 58°
Version 583 Series

Contact

Av. Ingeniero José
Alegría nº 4, Bajo 2
30007 Murcia Tel.663663739

Métodos de pago

en