Camshaft kit

Includes 487 Reaper Chain Drive camshaft, cam and tappet installation kit.
487 Reaper Cam
Bolt-on installation
Chain drive
38° Overlap
RPM range 2,250 - 6,100
Camshaft for 114" and 117" engine
Responds very well to increased displacement and/or compression
Maintains power at low revs and offers strong response above 2,950 rpm compared to the original model
Camshaft specifications measured at the lifter at 0.050 lift with a rocker arm ratio of 1.61.
Camshaft installation kit
Includes cam bearing, cam/crank hardware and gasket/O-ring kit.
Allows installation of original single-piece pushrods or optional Feuling® heavy duty HP+® 0.165 wall single-piece pushrods.
Race Series Pushrods
Hydraulic lifters with a total travel of 0.200
Designed with a slower discharge rate to withstand high valve spring pressures.
They increase engine RPM before valve float and offer more space for rollers on cams with steep ramps and for the flange of the front exhaust camshaft lobe on the Milwaukee Eight.
Manufactured in the USA
High-strength monobloc pushrods are highly recommended.
Feuling® mounting kit recommended to prevent cylinder head cracking.
A high-flow exhaust system and air filter are strongly recommended for optimal performance.
High Lift valve springs required for standard cylinder heads; Screamin Eagle heads include them, but must be verified.
Feuling® does not recommend adjustments exceeding original emissions standards.
Not suitable for VVT engines.
Includes:
• Chain-driven camshaft
• Race Series® Spigots
• Camshaft installation kit



Specifications


Brand
FEULING PARTS


Supplier reference
1462


Intake cam centre
98,5°


Exhaust cam centre
103,25°


Intake closure
37°


Exhaust Clamp
17,5°


Intake duration
237°


Exhaust duration
241,5°


Intake valve lift
0,478"


Intake valve lift at TDC
0,180"


Exhaust valve lift
0,487"


Exhaust valve lift at TDC
0,146"


Model
Reaper


Product name
Camshaft Kit


Type
Chain drive


Units
Kit


Open intake valve
20,5°


Open Exhaust Valve
44°


Version
487 Series