Contact
Av. Ingeniero José
Alegría nº 4, Bajo 2
30007 Murcia Tel.663663739
Métodos de pago
- Visa
- Mastercard
- Bizum
- American Express
Made to order from the USA
Estimated delivery in 30-45 days · Shipping surcharge 15€ per order · No cancellation or return, unless defective · Terms and conditions
Made to order from the USA
Válvula de respiradero rotatoria en acero177,59€ IVA inc.
Engranaje intermedio bomba de aceite - Tensor de retorno de marcha43,09€ IVA inc.
Filtro de aceite - negro Indian7,86€ IVA inc.
Cuerpo de bomba de aceite billet Flow Pro 1810,88€ IVA inc.
Kit de enfriador de aceite - tubo universal451,82€ IVA inc.
Juntas tóricas para varilla de nivel de aceite22,39€ IVA inc.
- Includes a FUELING® High Flow billet cam plate manufactured from 7075 aluminium, 50% harder and more resistant than original or FUELING® OE+ parts.
- Increases oil flow and volume by enlarging the pump reservoirs and critical passages, matching the oil holes in the camshaft plate with those in the sump to improve lubrication of tappets, piston cooling injectors, crankshaft and conrod bearings.
- FUELING® oil pumps are bench-tested; the relief valve is sealed at a minimum of 30 psi and opens fully at 55-60 psi
- The greater oil volume due to larger gears and correctly sized channels, along with the seat and pressure relief valve seal, is essential for the correct operation of the lubrication system.
- The FUELING® oil pump and cam plate combination eliminates common pressure and return issues of original systems.
- FUELING® M-Eight oil pumps have a machined slot in the rear cover to accept the original crankshaft seal.
- Quieter and smoother engine operation
- Increased oil pressure, volume of
- Oil recovery and oil circulation
- 42% greater intake volume with port and passage sizing matched to the sump
- 68% more oil volume to the crankshaft and connecting rod bearing
- Engine temperatures drop by 15° to 25°
- Oil temperature is reduced by 15° to 30°
- 10-30 lbs additional oil pressure (psi)
- The M-Eight Water-Cooled™ oil pump offers 30% more pressure gear volume and 53% more return gear volume compared to the original.
- M-Eight Oil-Cooled™ engine pump with 27% more pressure and gear volume compared to the original
- Prevents oil accumulation in the sump, leaks from
- Crankcase gases and oily air filters
- Tests show an increase of 2 horsepower and 2 ft./lb. torque at the rear wheel on the M-Eight
- Includes Race Series® oil pump, Race Series® full or short travel hydraulic lifters, High Flow cam plate and installation kit, cam bearing, cam/crank bolts, engine assembly grease and fixings
- Machined oil pump in 7075 aluminium with 50% greater structural strength and resistance compared to standard pumps, maintaining tighter tolerances as temperature increases.
- Race Series® oil pumps offer a larger suction port volume than HP+ pumps.
- Race Series® full-travel hydraulic lifters (.200”) are designed with a slower exhaust rate to withstand high valve spring pressures, increase engine revs before valve float, and offer greater clearance for steep ramp cams and the front M-Eight exhaust camshaft nose.
- Short-stroke Race Series® hydraulic lifters (.115") that increase RPM by reducing valve float and vibrations, keeping the engine quiet.
- Reduced travel decreases the amount of oil required within the tappet, reducing oil aeration in high-lift, fast-acting cams.
- Manufactured in the USA
- Optional FUELING® X ARP bolt kit available for the high-flow cam plate PART #0932-0192 and the HP+ or RS oil pump combination. See PART #2401-0993, the optional ARP bolts for the oil pump do not use washers.
- FUELING® test results show up to a 50% reduction in engine sump oil level.
- On M-Eight engines, check the clearance between the front exhaust pushrod and the camshaft flange.
- Closure plate PART #0932-0036 required when using gear-driven camshafts
- Use with short-stroke pushrods PART #0928-0114 on standard base camshafts with short-stroke Feuling tappets (includes Feuling profiles 405, 465, 472, 508, 521 and 592).
Specifications
Brand FEULING PARTSSupplier reference 7097STFeatures Includes short-stroke hydraulic lifters, Oil CooledColour/finish RedStyle Chain drive, gear driveMaterial AluminiumModel Race Series®Product name Pump kitType Oil systemUnits Kit
Av. Ingeniero José
Alegría nº 4, Bajo 2
30007 Murcia Tel.663663739
We use our own and third-party cookies to improve the browsing experience, analyse traffic and display personalised content.
Manage your cookie preferences below:
Essential cookies allow basic functions and are necessary for the correct functioning of the website.
Diese Cookies sind erforderlich, um Kommentare auf dieser Website zu ermöglichen.
Statistical cookies collect information anonymously. This information helps us understand how visitors use our website.
Google Analytics ist ein leistungsstarkes Tool, das den Website-Traffic verfolgt und analysiert, um fundierte Marketingentscheidungen zu treffen.
Service URL: policies.google.com (abre en unha nova xanela)
SourceBuster wird von WooCommerce zur Bestellattribuierung basierend auf der Benutzerquelle verwendet.