FEULING PARTS

High-flow distributor plate

636,88€ IVA inc.

Made to order from the USA

Estimated delivery in 30-45 days Shipping surcharge 15€ per order No cancellation or return, unless defective Terms and conditions

Version: Conversión de placa de levas de alto flujo HD
SKU: AK-1596-9684 Category: Brand:
Compatible motorcycles (35 models)
Not exactly what you're looking for?Need help finding your spare part? Tell us and we will take care of it.
Locate your spare part
Version Conversión de placa de levas de alto flujo HD
Brand

FEULING PARTS

Motorcycle family

, , ,

Made to order from the USA

You may also like

Descripción.

  • The cam plate aligns the oil holes in the plate with those in the sump, increasing oil flow throughout the engine.
  • The camplates are pressure-tested and the relief valve is calibrated to open between 55-60 psi
  • Increases engine oil flow and volume by enlarging the pump reservoirs and critical passages.
  • Engine temperatures 25°–35° lower and oil temperatures 20°–30° lower.
  • When combined with the Feuling® Race Series oil pump, increases of 3 HP and 4 ft/lbs of torque at the rear wheel can be achieved.
  • Additional lubrication slot in the camshaft bearing, improving protection on cold starts
  • Oil pressure feed holes at the front and rear of the camshaft bearings to prevent excessive wear
  • Includes bearing screws and retaining plate
  • Manufactured in the USA
  • Only for use with Feuling® oil pumps.
  • Cam plates for Twin Cam '99-'06 (excluding '06 Dyna) have tighter bearing housing tolerances for a better press-fit.
  • Requires hydraulic chain drive system '07-'17 (tensioners, chains, sprockets and fittings).
  • Not suitable for '06 Dyna.

Specifications

Brand FEULING PARTS
Supplier reference 8011
Material 7075 machined aluminium
Model High Flow
Product name Distributing plate
Type Chain conversion
Units Unit

Contact

Av. Ingeniero José
Alegría nº 4, Bajo 2
30007 Murcia Tel.663663739

Métodos de pago

en