High flow cam plate - chain drive flow cams

The cam plate aligns the oil holes in the plate with those in the sump, increasing oil flow throughout the engine.
The camplates are pressure-tested and the relief valve is calibrated to open between 55-60 psi
Increases engine oil flow and volume by enlarging the pump reservoirs and critical passages.
Engine temperatures 25°–35° lower and oil temperatures 20°–30° lower.
When combined with the Feuling® Race Series oil pump, increases of 3 HP and 4 ft/lbs of torque at the rear wheel can be achieved.
Additional lubrication slot in the camshaft bearing, improving protection on cold starts
Oil pressure feed holes at the front and rear of the camshaft bearings to prevent excessive wear
Includes bearing screws and retaining plate
Manufactured in the USA
Only for use with Feuling® oil pumps.
Cam plates for Twin Cam '99-'06 (except 06 Dyna) have tighter cam bearing housing tolerances for a better press fit.
Requires use of Feuling HP+ or Race Series '99-'06 style oil pump.
Includes tensioner pins and guide hardware.
The cam plate is designed to work with the factory tensioner system on '99-'06 style Twin Cam camshafts.
Not for '06 Dyna.



Specifications


Brand
FEULING PARTS


Supplier reference
8010


Material
7075 machined aluminium


Model
High Flow


Product name
Distributing plate


Type
Chain drive


Units
Unit