Springer fork, OEM reproduction style. +8"

- Fork: Black - Front legs: Black - Swing arms: Parkerised as OEM - Springs: Chrome plated - For 3/4" (19.05 mm) axle - Rake: 3° positive offset - 1" diameter fork stem - Length: +8" (Standard length is approx. 19" (48 cm) from the lower fork stem bearing to the centre of the wheel axle) - Made from vacuum forged steel in the EU - With oval rear legs in the original style - Never ride a bike fitted with any type of Springer fork without a proper damping system!
Note: The 8, 12, 16 and 20" excess stock springers come with a 3° positive offset and require the use of a special centre piece (981460 chrome or 981461 black) to mount the late-style handlebar risers.
Note: Forks with positive offset (wheel further forward) offer less trail than an in-line fork. When using a custom frame with a raked neck, trail increases. Increased trail is acceptable as long as it is in a straight line. The bike may become heavy to steer at low speed, tend to drop into the corner and exhibit excess 'wheel flop' when stationary. To overcome these problems, trail must be reduced, which is achieved with a positive trail fork. For this reason, the Springer forks are only offered in Over Stock length with positive trail.


Specifications


Brand
Samwel


Application
36-E46 UL, EL style; Custom bikes with custom high neck or raked neck frames that require +8" Springer forks


Colour
Black


Material
Steel


Position
['Front']


Packaging weight
16.5 kg


HS Code
87141090


Motorcycle family
BIG TWIN


Original name
Springer fork, OEM style reproduction. +8"