Feuling, Reaper Race Series 592 cam kit

Note: Product by special order only. To place the order, contact your MCS sales representative.
Chain drive.
This Feuling M8 camshaft kit includes chain-driven camshaft, Race series lifters and a camshaft installation kit comprising camshaft bearings, camshaft/crankshaft fixings and a gasket/O-ring kit allowing installation of the factory one-piece pushrods. Feuling recommends the optional one-piece, high-strength HP+ pushrod kit, 993528, with a 0.165" wall thickness.
The Feuling 707450 rocker box fastener kit is also highly recommended to help prevent head gasket leakage; this kit replaces the rocker arm shaft screws with studs and nuts to reduce stress on the rocker arm shaft spacers.
592 CAM - "The big and aggressive one". Get serious about bore size, ported heads and throttle body. Aggressive camshaft requiring high lift and high load valve springs, pushrods and performance lifters. High flow air filter and triple stepped exhaust pipe highly recommended. FEULING also recommends pairing this camshaft with our RACE SERIES oiling system.
NOTE: High lift/high load valve springs are required; Feuling recommends their high load beehive valve spring kit 588022. Clearances must be checked when installing this camshaft.
The kit includes 707743 592 camshaft. RPM range: 2,750 - 6,350.
Valve Lift Open Close Duration @ Lobe Centreline at 50" Intake .578 20 34 234 97 Exhaust .592 68 16 264 116 Overlap: 36
• RACE SERIES hydraulic lifters have .200" of total travel, designed with a slower bleed rate to handle high valve spring pressures, increase engine RPM before valve float, and feature greater roller clearance for aggressive ramp camshafts and clearance for the M8 front exhaust camshaft lobe flange.
*Camshaft specifications measured at the tappet @ 0.050" lift with a 1.61 rocker ratio
WARNING: NOT FOR SALE OR USE IN CALIFORNIA ON ANY EMISSIONS CONTROLLED MOTOR VEHICLE
Feuling does not recommend tuning beyond factory emission standards.
Note: SE cam plates #25400419 have been found to have clearance issues with high lift camshafts.


Specifications


Brand
Feuling


Application
18-26 Softail; 17-26 FLT/Touring (excl. 23-26 VVT); 17-26 Trikes


Sales unit
Kit


Packaging weight
0 kg


HS Code
84831021


Motorcycle family
SOFTAIL, TOURING, TRIKE


Original name
Feuling, Reaper Race Series 592 cam kit