Contact
Av. Ingeniero José
Alegría nº 4, Bajo 2
30007 Murcia Tel.663663739
Métodos de pago
- Visa
- Mastercard
- Bizum
- American Express
Category specialising in camshafts for Harley-Davidson and American custom motorcycles. Includes intake and exhaust profiles for Evolution, Twin Cam, Milwaukee Eight, Knucklehead, Panhead, Shovelhead and Flathead engines. Parts designed to optimise cylinder filling and gas evacuation, improving torque and throttle response.
Direct fitment. More torque for general riding. For 88 inch models with standard CR, stock pistons and heavy…
Direct fit for stock 88-95 inches and CR. Ideal for two-up touring. Increased torque and power in the…
Excellent cam for 95" engines with a compression ratio of 9.8 to 10.2. Lower lift at TDC for…
95 inch engines. Compression ratio of 9.5 to 9.8 with stock cylinder heads. Torque and power in the…
95 cubic inch engines. Compression ratio of 9.8 to 10.2. Maximum torque and power in mid and high…
For gear-driven camshafts. Specifications Brand Andrews Application 06-17 Dyna; 07-17 Softail; 07-16 FLT/Touring (NU) Sales unit Kit Material…
Includes all parts necessary to install S&S & Andrews gear-driven Twin Cam camshafts. Comes complete with replacement cam…
Gear with keyway. Incl. bolt, key, washer and three spacers. This Andrews 503576 gear is an improved design…
Splined. Includes bolt, washers and 3 spacers. OEM style replacement. Specifications Brand Andrews Application 00-06 Softail; 00-03 FLT/Touring;…
Chain drive.594 CAMS - High-performance camshaft for a variety of engine sizes, large displacements of 103", 110" and…
Chain drive.594 CAMS - High-performance camshaft for a variety of engine sizes. Designed for large displacement engines of…
Used to convert 1999-2006 Twin Cams, with the original spring-adjusted mechanical chain tensioners, to the 06-17 style hydraulic…
Used to convert 99-06 Twin Cams, with the original spring-adjusted mechanical chain tensioners, to the 06-17 style hydraulic…
Camshaft sprocket thrust and alignment washer kit. The alignment spacers/washers are used to align the rear camshaft sprocket…
Direct mount. .445" intake, .465" exhaust. Good low-rpm torque, but above 2800 RPM it delivers solid performance gains…
Chain drive.HP+ kits include HP+ tappets.This Feuling M8 camshaft kit includes a chain-driven camshaft, HP+ lifters and a…
Chain drive.This Feuling M8 cam kit includes chain drive camshaft, Race series lifters and a camshaft installation kit…
This kit allows engine builders to replace the hydraulic cam chain tensioner pad on factory M8 models.Note: Includes…
For early Twin Cam models 99-01 equipped only with the standard cam position sensor. Designed for use with…
Chain drive.592 CAM - "The big nasty" Get serious with bore size, ported heads and intake, high-flow valves…
Chain drive.618 F crankshaft - Race Series. Requires large-bore cylinder heads, ported heads, ported intake manifold, high-flow valves…
Sold as a kit of 2 bearings. Replaces the OEM style 8990/A ball bearing. This bearing is compatible…
Complete kit for correctly setting up the camshaft, with nothing left out. The kit includes the following OEM…
Complete kit for correctly adjusting side-valve cams, leaving nothing out. The kit includes the following OEM references: 9x…
Compatible with Sportster, Dyna, Softail, Touring and Big Twin. Available in polished, chrome or matt black finishes for restoration or performance enhancement.