Feuling cam plate and oil pump kit for Milwaukee Eight

These kits combine all the components needed to complete your Milwaukee Eight engine lubrication system and increase oil pressure, oil volume, engine oil flow and oil recovery.
 • Quieter engine operation
 •27% more gear pressure and swept volume over the original
 •42% more swept volume through the port size, passages and holes corresponding to the engine case
 •68% more oil volume to crankshaft and con rod
 •Cools the engine by 15-25°
 •Cooler temperatures 15-30°
 •10-30PSI more oil pressure
 •Reduces wet sumping, blow-by and oil filters
 •Test results show a 2HP gain and a 2 ft/lb torque gain at the rear wheel and up to a 50% reduction in the engine crankcase oil level
 
 Kits include a cam plate made from 7075 aluminium that is 50% harder and stronger than factory cam plates. These plates increase oil flow and volume by enlarging the oil reservoirs and critical oil passages, including the oil port holes in the engine case bores, which increases oil flow from the engine to the lifters, piston cooling jets, crankshaft and connecting rod bearings. The included oil pumps are bench tested, the relief valve is seated and sealed at a minimum of 30PSI with a full burst of 55-60PSI. The increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal of these oil pumps is essential for the correct operation of the lubrication system. 
 The kits also include HP+ roller hydraulic lifters and camshaft installation kit, cam bearings, cam/rod bolts and washers, engine assembly lubricant and retainer.


Specifications


Pack
1


HS Code
8714109090


Origin
US


Motorcycle family
Touring | Trike