S&S, 585G (IOG) gear-driven camshaft kit.

.585" valve lift. IOG = gear-driven camshafts with internal and external drive gears. Complete kit with installation hardware, bearings and gasket.
Direct fit for 88" to 106" engines with 9.7:1 to 10.5:1 compression ratio and 106" to 124" engines with 9:1 to 10:1 compression ratio. 3500-6000 RPM for 88" to 103" engines and 2500-5500 RPM for larger engines.
The gear drive system is in fact a revolutionary, different and far more reliable construction. Especially in high lift/performance applications, compared with the factory chain drive design. A gear driven camshaft is stronger and does not suffer any of the mechanical problems associated with factory chain driven camshafts. The S&S gear drive kit will increase valve timing accuracy and therefore power, by eliminating timing chain slack and the loose-fitting stock cam gears. The only downside of gear drive is that you may experience a slight increase in mechanical noise; this is why the factory uses a chain. It has no other mechanical advantage. As the chain guides and tensioner are removed, there is no longer any chance of these parts failing and damaging other parts of the engine. The S&S gear drive kit reverses the rotation of the rear camshaft, providing additional operating clearance between the cams. As a result, greater cam lifts are possible with S&S gear driven camshafts.
Note: With the exception of the 475G and 510G camshafts, adjustable pushrods (such as MCS 503573) are required to compensate for the smaller base circle of the camshaft of these cams.
Note: It may be necessary to remove material from the inner surface of the factory gear cover before installing the S&S external drive gears (which are required and available as 503577).
Note: The factory beehive valve springs on 04-17 Dyna; 04-17 Softail and 04-16 Touring models support valve lifts of up to 0.590" and a valve seat force of 160 lb, up to 6200 RPM. Exceeding 6200 RPM or lifts above 0.590" will require high performance valve springs.


Specifications


Brand
S&S


Application
07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)


Sales unit
Kit


Material
Steel


Packaging weight
0.7 kg


HS Code
84831021


Motorcycle family
DYNA, SOFTAIL, TOURING, TRIKE


Original name
S&S, gear drive 585G camshaft set (IOG)