High pressure and high volume oil pump for M-Eight

The greatest oil volume thanks to larger rotors and correctly sized oil passages along with the seat and sealing of the pressure relief valve of these oil pumps is essential for proper functioning d
Eliminates the pressure and oil return issues normally associated with standard lubrication pumps
Pressure relief valve and precision-machined orifice
Each pump is bench tested; the relief valve is sealed to a minimum of 30 psi and opens fully at 55-60 psi.
Feuling® M-Eight oil pumps have a machined slot in the rear cover to accommodate the original crankshaft seal.
Combined with a Feuling® cam plate, the pumps reduce engine and oil temperature, increase oil pressure volume and return volume to prevent oil accumulation in the sump.
Increased engine oil inlet and outlet flow with corrected tolerances, larger oil passages and gerotors
2.250" high-flow chrome-molybdenum gerotor gears
42% greater extraction volume with optimised ducts, ports and holes towards the sump
68% more crankshaft oil and conrod bearing volume
Magnets that help protect the rotors and the pressure relief valve
More power and torque
Rear wheel
M-Eight Twin-Cooled™ engines offer 30% more pressure gear volume and 53% more return gear volume compared to the original model
Oil-cooled M-Eight engines offer 27% more recovery gear pressure and volume compared to the standard
6061 aluminium machined with natural finish
Increased oil pressure
Increased pump duct volume
Eliminates oil buildup and crankcase gas leaks
Lower oil and engine temperatures
Manufactured in the USA
The enlarged and optimised holes and return ducts must be used in combination with a Feuling® High Flow cam plate PART #0932-0192.
EU: Each pump is bench-tested, the relief valve seats and seals at a minimum of 2.06 bar, with full opening at 3.79–4.13 bar.
The M-Eight oil pickup is on the right-hand side of the engine. Leaving the motorcycle idling or warming it up on the side stand will naturally fill the sump and alter the oil level in the reservoir.
EU: High-flow 5.72 cm gerotor gears in chrome-molybdenum.



Specifications


Brand
FEULING PARTS


Supplier reference
7019


Features
Twin Cooled


Colour/finish
Natural


Material
6061 machined aluminium


Model
HP+®


Product name
Pump


Type
Aceite


Units
Unit