HP+® high volume oil pump - 17-19 Mil8 oil/cam plate

Increases engine oil pressure, volume and flow, as well as return oil suction volume
Quieter and smoother engine operation
Engine temperatures 15-25 degrees lower
Oil temperatures 15-30 degrees lower
10-30 lbs additional oil pressure
Prevents oil accumulation in the sump, gas leaks into the sump and oily air filters
Tests show an increase of 2 horsepower and 2 ft/lbs torque at the rear wheel on M-Eight
Includes a high-flow 6061 billet aluminium oil pump and a 7075 billet FEULING® High Flow cam plate; 50% harder and more robust than standard or FEULING® OE+
Increases engine oil flow and volume by enlarging the oil pump reservoirs and critical oil passages, including the sizing of the oil holes in the timing plate to match the engine sump holes
Oil pumps are bench-tested; the relief valve is sealed and adjusted to a minimum of 30 psi, with full opening at 55-60 psi
The greatest oil volume thanks to larger rotors and correctly sized oil passages along with the seat and sealing of the pressure relief valve of these oil pumps is essential for proper functioning d
The FEULING® oil pump and camplate combination eliminates common pressure and return issues associated with original lubrication systems
FEULING® M-Eight oil pumps feature a machined slot in the rear cover to accommodate the original crankshaft seal
Manufactured in the USA
FEULING® test results show up to a 50% reduction in oil level in the sump.
EU: 0,69 - 2,06 Bar additional oil pressure
Optional mounting kit for Camplate/oil pump PART #2401-0993 available separately.
EU: Test results show an increase of 2 horsepower and 2.71 Nm of torque at the rear wheel on the M-Eight.
The M-Eight oil pickup is on the right-hand side of the engine. Leaving the motorcycle idling or warming it up on the side stand will fill the sump and alter the oil level in the tank.
EU: Oil pumps are bench-tested; the relief valve is sealed to a minimum of 2.06 bar with full opening between 3.79 bar and 4.13 bar.
Delivers 27% more pressure and recovery gear volume compared to the original, 42% more recovery volume through optimised ducting, passages and holes adapted to the sump, and 68% more oil volume to the crankshaft and connecting rod bearing.



Specifications


Brand
FEULING PARTS


Supplier reference
7196


Features
Oil Cooled


Colour/finish
Red


Style
Chain drive, gear drive


Material
6061 machined aluminium


Model
HP+®


Product name
Pump kit


Type
Aceite


Units
Kit